ISUZU TECH2 with ISUZU 24V adapter for truck diagnostic software
version V11.540
Software V11.540 ISUZU TECH 2 Diagnostic Software 32MB Cards
Software version : V11.540, from 1998 to 2013
Display language can be selected according customer's demand
Supporting hybrid and CNG vehicles
Software Language: Czech Denish German Greekn English Spanish
Finnish French Croatian Hungarian Indonesian Italian Jananese Dutch
Norwegian Portuguese(Bazil) Russian Sweden Thau Turkey Traditional
Chinese Simplified Chinese
Package List:
Isuzu Tech2 full set, one unit
Isuzu 24V adatper for truck test,one unit
32mb software card: V11.540, one unit
ISUZU Tech-2 is the same tester GM Technicians use to diagnose GM
vehicles. The Vetronix Tech 2 comes with Authentic GM software and
provides support for on-board diagnostics on all GM systems 1992 to
2012
Features:
Authentic ISUZU software in the Tech 2 Flash means the most
comprehensive diagnostic software available for late model ISUZU
vehicles.
Support for on-board diagnostics on all ISUZU systems 1992 thru
current year.
Removable hardware modules provide insurance against scan tool
obsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to
your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record
for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic ISUZU 1992-current year software will provide full
bi-directional control when performing power train, chassis, and
body diagnostics.
ISUZU Tech-2 Specifications
Dimensions
12″×6″×2″
Microprocessor
32 bit, 16 MHz
Memory
32 MB flash type II PCMCIA. Type III slot available for future
expansion.
Communications
Integral RS232 communication port.
Screen
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240
pixels. Displays up to 9 vehicle parameters at once
ISUZU Tech-2 Starter Kit with Candi Module & TIS Kit includes :
Tech-2 Flash Tester
32 MB PCMCIA Card with ISUZU OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet
download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
Tech-2 Users Manual
An industry change in protocol from OBD II to Controller Area
Network (CAN) has begun. In order to perform diagnostics on a
vehicle that uses the CAN interface; you will need the Tech 2 Flash
and a CAN diagnostic interface module. The module connects between
the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once
the module is connected, it can be used on all Isuzu vehicle
applications, even those vehicles using other platforms such as OBD
I and OBD II.
